Ph: (518) 372-3807
 sales@SoftNCushyauto.com

1731 State Street
Schenectady, NY 12304
 
Interiors
  Leather
  Dash Trim
  Steering Wheels
Electronics
  Navigation
  DVD Players
  Stereo's
  Starters
  Seat Heaters
  Massaging
  Front/Rear Sensors
Exteriors
  Spoilers/Wings
  Chrome Kits
  Truck Steps
  Tow Kits
  Tanneau Covers
  Wind/Rain Guards
Sunroofs
  Standard Roof
  Panoramic
 
 Car Audio Systems - Amplifiers

Soft N' Cushy Auto features a full line of audio equipment for your vehicle. Give yourself that premium quality sound and clarity you have been looking for. Test out our Speakers, In-Dash Stereo's and Amplifiers right in our custom audio booth before you buy. Mix and match products to perfectly suit your needs. CD stereo's, Digital Screen displays, Ipod & MP3 integration and more.

Car Stereo's Amplifiers Speakers & Subs Wiring & Accessories
  The Eclipse ZA1200 subwoofer amplifier delivers up to 1,200 watts RMS to your subwoofer system. Adjust the variable low-pass filter to get the best performance from your subwoofer/box combo, or use the variable bass boost for music that requires a little more bottom. The subsonic filter screens out frequencies below the range of human hearing, so your amplifier works more efficiently.
  • mono subwoofer amplifier
  • 1,000 watts RMS x 1 at 4 ohms (1,200 watts RMS x 1 at 2 ohms)
  • CEA-2006 compliant
  • variable low-pass filter (45-200 Hz, 18 dB/octave)
  • variable bass boost (0-8 dB at 32-64 Hz)
  • subsonic filter (22 Hz, 18 dB/octave)
  • ICEpower® full-range Class-D amplifier design
  • MOSFET power supply
  • fuse rating: 40A x 4
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • 12-3/16"W x 2-3/8"H x 10-1/4"D
    		•
     
      The Eclipse XA4200 4-channel amplifier delivers 125 watts RMS to each of its channels, or 400 watts by two channels in bridged mode. Adjust the variable high- and low-pass filters to get the best performance from your speakers or subs, or use the variable bass boost for music that requires a little more bottom. The subsonic filter screens out frequencies below the range of human hearing, so your amplifier works more efficiently.
  • 4-channel car amplifier
  • 125 watts RMS x 4 at 4 ohms (200 watts RMS x 4 at 2 ohms)
  • 400 watts RMS x 2 bridged at 4 ohms
  • CEA-2006 compliant
  • variable high-and low-pass filter (40-500 Hz, 18 dB/octave)
  • variable bass boost (0-8 dB at 32-64 Hz)
  • subsonic filter (22 Hz, 18 dB/octave)
  • ICEpower® full-range Class-D amplifier design
  • MOSFET power supply
  • fuse rating: 40A x 2
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • 12-3/16"W x 2-3/8"H x 10-1/4"D
    		•
     
      The XA1200 subwoofer amplifier delivers up to 600 watts RMS to your subwoofer system. Adjust the variable low-pass filter to get the best performance from your subwoofer/box combo, or use the variable bass boost for music that requires a little more bottom. The subsonic filter screens out frequencies below the range of human hearing, so your amplifier works more efficiently.
  • mono subwoofer amplifier
  • 500 watts RMS x 1 at 4 ohms (600 watts RMS x 1at 2 ohms)
  • CEA-2006 compliant
  • variable low-pass filter (45-200 Hz, 18 dB/octave)
  • variable bass boost (0-8 dB at 32-64 Hz)
  • subsonic filter (22 Hz, 18 dB/octave)
  • full-range ICEpower® Class-D amplifier design
  • MOSFET power supply
  • fuse rating: 40A x 2
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • 10-5/16"W x 2-3/8"H x 10-1/4"D
    		•
     
      The Eclipse EA4200 4-channel amplifier delivers 60 watts RMS to each of its channels, or 150 watts per channel in 2-channel mode. Variable high- and low-pass filters determine which frequencies go to your speakers, while a subsonic filter screens out inaudible low frequencies for more efficiency. The amp's preamp outputs feature a low-pass filter, so you can connect and adjust your subwoofer amplifier.
  • 4-channel car amplifier
  • 60 watts RMS x 4 at 4 ohms (70 watts RMS x 4 at 2 ohms)
  • 140 watts RMS x 2 bridged output at 4 ohms
  • CEA-2006 compliant
  • variable high- and low-pass filter (30-500 Hz, 18 dB/octave)
  • variable bass boost (0-8 dB at 45 Hz)
  • subsonic filter (18 Hz, 18 dB/octave)
  • full-range Class-D amplifier design
  • MOSFET power supply
  • fuse rating: 30A x 1
  • 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • 10-1/4"W x 2-3/8"H x 7-11/16"D
    		•
     
      An EQ tool for professional applications where systems require precision tonal contouring at a 1/3 octave level, the EQ2102 offers ease-of-use over sophisticated EQ parameters when used with an RTA and pink noise, resulting in smooth band-to-band frequency transitions.
    Stereo configured unit
    30 frequency bands
    Input level control
    EQ defeat
    Boost cut selectable ±6/12dB
    Switchable subwoofer crossover
    Summed channel line output
    LED overload indicators
     
      MTX Thunder Elite amplifiers are the most technologically advanced amplifiers that MTX offers. Not only are the features and quality superior, but the looks and design of the amplifer puts the Thunder Elite series at the top of the amplifier line.
    hunder Elite amps feature MTX Smart Engage technology making it easy to add Thunder amplifiers to any factory or aftermarket systemwithout additional adapters or converters. You get to keep your factory A/V system, steering wheel controls and navigation without removing the factory source. Designed by xtant technologies, the fan brings the amplifier to a whole new level. Not just a fan, XTC is a self adjusting, turbo-charged intercooler that intelligently supplies cool air evenly and constantly over all devices based on the amplifier's demand.
    • Thunder Elite Series 1-Channel Class D Car Amplifier
    • RMS Power Rating:
      • 4 ohms: 1250 watts x 1 chan.
      • 2 ohms: 2200 watts x 1 chan.
      • 1 ohms: 3750 watts x 1 chan.
    • Max power output: 7500 watts x 1 chan.
    • Semi Unregulated MOSFET
    • Remote bass level input (remote level control sold separately)
    • LED thermal and short indicators
    • Pure N-channel design
    • Single channel operation
    • Overload and thermal protection
    • Prizm EFX With Demo Mode
    • Self adjusting, turbo-charged intercooler that intelligently supplies cool air evenly and constantly over all devices based on the amplifier's demand
    • Variable low-pass filter (40-200 Hz, 12 dB/octave)
     
      Thunder Elite amps feature MTX Smart Engage technology making it easy to add Thunder amplifiers to any factory or aftermarket systemwithout additional adapters or converters. You get to keep your factory A/V system, steering wheel controls and navigation without removing the factory source. Designed by xtant technologies, the fan brings the amplifier to a whole new level. Not just a fan, XTC is a self adjusting, turbo-charged intercooler that intelligently supplies cool air evenly and constantly over all devices based on the amplifier's demand. 
    • MTX TE1501D Thunder Elite Series 1-Channel Class D Car Amplifier
    • RMS Power Rating:
      • 4 ohms: 500 watts x 1 chan.
      • 2 ohms: 1000 watts x 1 chan.
      • 1 ohm: 1500 watts x 1 chan.
    • Max power output: 3000 watts x 1 chan.
    • Semi Unregulated MOSFET
    • Remote bass level input (remote level control sold separately)
    • LED thermal and short indicators
    • Pure N-channel design
    • Single channel operation
    • Overload and thermal protection
    • Prizm EFX With Demo Mode
    • Self adjusting, turbo-charged intercooler that intelligently supplies cool air evenly and constantly over all devices based on the amplifier's demand
    • Variable low-pass filter (40-200 Hz, 24 dB/octave)
     
      Thunder Elite amps feature MTX Smart Engage technology making it easy to add Thunder amplifiers to any factory or aftermarket systemwithout additional adapters or converters. You get to keep your factory A/V system, steering wheel controls and navigation without removing the factory source. Designed by xtant technologies, the fan brings the amplifier to a whole new level. Not just a fan, XTC is a self adjusting, turbo-charged intercooler that intelligently supplies cool air evenly and constantly over all devices based on the amplifier's demand. 
    • MTX Audio Thunder Elite 2-Channel Class A/B Car Amplifier
    • RMS Power Rating:
      • 4 ohms: 100 watts x 2 chan.
      • 2 ohms: 225 watts x 2 chan.
      • 1 ohm: 300 watts x 2 chan.
      • Bridged, 4 ohms: 450 watts x 1 chan.
      • Bridged, 2 ohms: 600 watts x 1 chan.
    • Max power output: 1200 watts x 1 chan.
    • MOSFET power supply
    • Wired remote bass level control included
    • LED power indicators
    • Tuned Bass EQ (0-12 dB bass boost)
    • Bi-level input with Smart engage
    • Input switch
    • Gain control
    • Quasi parametric crossover
    • Thermal and overload Protection
    • XTC turbo-charged intercooler for maximum cooling
    • Prizm EFX lighting with demo mode
    • RCA level inputs
    • Screw terminals
    • Variable high-pass filter (40-350 Hz, 12 dB/octave)
    • Variable low-pass filter (40-350 Hz, 24 dB/octave)
    • Frequency response: 20-20,000Hz
     
      Thunder Elite amps feature MTX Smart Engage technology making it easy to add Thunder amplifiers to any factory or aftermarket systemwithout additional adapters or converters. You get to keep your factory A/V system, steering wheel controls and navigation without removing the factory source. Designed by xtant technologies, the fan brings the amplifier to a whole new level. Not just a fan, XTC is a self adjusting, turbo-charged intercooler that intelligently supplies cool air evenly and constantly over all devices based on the amplifier's demand.
    • Thunder Elite Series 4-Channel Class AB Car Amplifier
    • RMS Power Rating:
      • 4 ohms: 125 watts x 4 chan.
      • 2 ohms: 225 watts x 4 chan.
      • Bridged, 4 ohms: 450 watts x 2 chan.
    • Max power output: 1900 watts (475 watts x 4 chan.)
    • Semi Unregulated MOSFET
    • Remote bass level input (remote level control sold separately)
    • LED power and protection indicators
    • Tuned Bass EQ (0-18 dB bass boost at 40 Hz)
    • Pure N-channel design
    • 4/3/2/1 channel operation
    • Speaker-level inputs with signal sensing for automatic turn-on)
    • Preamp RCA outputs
    • Overload and thermal protection
    • Prizm EFX With Demo Mode
    • Self adjusting, turbo-charged intercooler that intelligently supplies cool air evenly and constantly over all devices based on the amplifier's demand
    • Variable high-pass filter (40-350 Hz, 12 dB/octave)
    • Variable low-pass filter (40-350 Hz, 24 dB/octave)
     
      Thunder Elite amps feature MTX Smart Engage technology making it easy to add Thunder amplifiers to any factory or aftermarket systemwithout additional adapters or converters. You get to keep your factory A/V system, steering wheel controls and navigation without removing the factory source. Designed by xtant technologies, the fan brings the amplifier to a whole new level. Not just a fan, XTC is a self adjusting, turbo-charged intercooler that intelligently supplies cool air evenly and constantly over all devices based on the amplifier's demand.
    • Thunder Elite 4-Channel Class AB Car Amplifier
    • RMS Power Rating:
      • 4 ohms: 80 watts x 4 chan.
      • 2 ohms: 150 watts x 4 chan.
      • Bridged, 2 ohms: 600 x 1 chan.
    • Max power output: 1200 watts x 1 chan.
    • Semi Unregulated MOSFET
    • Remote bass level input (remote level control sold separately)
    • Dual Mono Output
    • Overload and Thermal Protection
    • High Level with Smart Engage Auto Turn-on RCA Input
    • Input Select 2/4 Channel
    • Prizm EFX Lighting
    • Xtant Technologies Cooling: Thermal-regulated, turbo charged, intercooler
    • Bi-Level RCA Inputs (high/low)
    • Variable high-pass filter (40-350 Hz, 24 dB/octave)
    • Variable low-pass filter (40-350 Hz, 24 dB/octave)
    • CEA-2006 compliant amplifier
    • Frequency response: 20-20000 Hz
     
      1050 watts mono amplifier   The Power1050 starts off our POWER series with a mono amplifier ready for duty in your sound system unit. It will be that one component that makes your friends wonder what just happened!
      Low pass filter 40-150 Hz
      Encapsulated power and speaker connectors
      Protection circuit that safeguards against short circuits
      DC-offset and thermal overload
      Remote input level control
     
      400 watt 2 channel amplifier   Let's face it, not everyone has the talent to build their own sound system. But for those of you who do, the POWER400 2 channel amplifier is an important part of your audio component chain. With its 400 watts of peak power, superior low pass and high pass filters, its variable bass EQ and so many other features, your set up will be rockin'! Go on, brag a lot!
      Designed to meet CEA-2006 test standards
      High current bi-polar output transistors
      Compact design allows great flexibility in mounting
      MOSFET power supply
      Built-in low-pass and high-pass crossover filters for bi-amplifying
     
      760 watt 4 channel amplifier   You're no newbie! You've built sound systems before. Now you're stretching your sound muscles with the POWER760 4 channel amplifier. It tops out at 760 watts of peak power, has a protection circuit that safeguards against short circuits, DC offset and thermal overload, a channel mode selector which allows you to switch from 4, 3 or 2 but wait a minute! We forgot who we were talking to...you're way ahead of us!
      Designed to meet CEA-2006 test standards
      High current bi-polar output transistors
      Compact design allows great flexibility in mounting
      MOSFET power supply
      Built-in low-pass and high-pass crossover filters for bi-amplifying
     
      900 watt mono amplifier   Power to the people! That's exactly what the POWER900 mono amplifier has to offer! Power and then some, at 900 watts of peak power. As a rising star in our Power Amplifier Series, it deserves a second look.
      Designed to meet CEA-2006 test standards
      High current bi-polar output transistors
      Compact design allows great flexibility in mounting
      MOSFET power supply
      Green operation and red protection LEDs
     
         
     
         
         


          

    LEATHER - DASH TRIM - STEERING WHEELS - NAVIGATION - DVD SYSTEMS - STEREO - STARTERS - SEAT HEATERS - MASSAGING
    FRONT/REAR SENSORS - SPOILERS/WINGS - CHROME KITS - TRUCK STEPS - TOW KITS - WIND/RAIN GUARDS - SUNROOFS

    ®Soft N' Cushy Auto 2009 -            Contact Us           Employment Opportunities         Directions